Raspberry Pi 3 model B+, 1GB RAM, WiFi, Bluetooth onboard

Opis

strujni adapter 8011600850,8011600851
hladila 2450028010, 2450028011 i 2450028012
kamere 8208000300 i 8208000305
kartica sa softwareom 8208000145
zasloni 8208000400 i 8208000405

i pripadajuće kutije 8208000200 do 8208000216

Boasting a 64-bit quad core processor running at 1.4GHz,
dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT.
The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into
end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.
The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

Broadcom BCM2837B0, Cortex-A53, 64-bit, quad-core SoC @ 1.4GHz
1GB LPDDR2 SDRAM
2.4GHz/5GHz IEEE 802.11 b/g/n/ac Wireless LAN (WLAN)
Gigabit Ethernet over USB 2.0 (maximum throughput 300Mbps)
On-board wireless LAN - dual-band 802.11 b/g/n/ac (CYW43455)
On-board Bluetooth 4.2 HS low-energy (BLE) (CYW43455)
4 x USB 2.0 Ports
Extended 40-pin GPIO Header
Full Size HDMI, MIPI DSI display port, MIPI CSI camera port
4-pole stereo audio/composite video output port
MicroSD card slot for operating system and data storage
VideoCore IV multimedia/3D graphics core @ 400MHz/300MHz

Power over Ethernet (PoE) enabled (requires separate PoE HAT)
Power supply requirements - 5V/2.5A DC via micro USB or GPIO

With the ARMv8 processor it can run the full range of ARM GNU/Linux distributions, including Snappy Ubuntu Core,
as well as Microsoft Windows 10 IoT edition.

You will need the latest NOOBS image for the Wireless LAN and Bluetooth drivers to be installed.

Faster processing

Improved thermals on the Pi 3 B+ means that the CPU on the BCM2837 SoC can now run at 1.4GHz,
a 17% increase on the previous Pi 3 model (which ran at 1.2GHz).

Video performance on Pi 3 B+ is similar to the previous generation Pi 3, the VideoCore being clocked at 400MHz for
video processing and the 3D graphics processor running at 300MHz.

Faster wireless

A significant change on the Pi 3 B+ compared to the Pi 3 is the inclusion of a new faster,
dual-band wireless chip (CYW43455) with 802.11 b/g/n/ac wireless LAN and Bluetooth 4.2.

The dual-band 2.4GHz and 5GHz wireless LAN enables faster networking with less interference
(although the higher bandwidth has less range), and the new PCB antenna technology should allow better reception.

Bluetooth allows you to use a wireless keyboard/trackpad without extra dongles, keeping things nice and tidy.

Faster ethernet

The Pi 3 B+ has significantly faster wired networking, thanks to an upgraded USB/LAN chip,
and you should see speeds that are 3-5x faster than on previous models of the Pi, at least 300Mbit/s.

GPIO and layout

The GPIO header remains the same, with 40 pins, as on the previous three models of Pi. However,
it should be noted that the new PoE header pins may contact components on the underside of some HATs, like Rainbow HAT.