Strujna kliješta Wiha 1000V AC, 45219

Opis

Product description

When working, for example, on electrical systems that cannot be switched off, current measurement is a major challenge.
With the measuring caliper from Wiha, the caliper bracket can be used to carry out measurements without interrupting the electrical circuit.
Handling is greatly facilitated by the remote single-hand testing.
The test tips allow additional tests, voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests. This multi-functionality significantly increases the efficiency.
A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments.
The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values.
According to the measurement category CAT IV up to 1,000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations.

Measuring category
CAT IV up to 1,000 V.
Standard
Protection rating IP40.
Application
For multi-functional use in different application locations.

Technical details

Voltage V DC min – max 0 - 1500
Voltage V AC min – max 0 - 1000
Current A DC 400
Current A AC 400
Resistance (M?) 40 M?
Integrated flashlight Yes
Frequency (MHz) 5 MHz
True RMS Yes
Background illumination Yes
Data HOLD Yes
Min. measurement Yes
Max. measurement Yes
Measuring category CAT IV 1,000 V
Remote voltage test Yes
with battery Yes
AVG measurement Yes
Continuity check < 30 ?
Overall length (mm) 220
Capacity (µF) 100 µF